> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://support.elevationadvisor.com/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# Plants

If this is your first time working in landscape sections, we recommend reviewing the [Beds article](https://support.elevationadvisor.com/en-us/article/beds-begin-here-if-you-are-just-getting-started-with-sections-147cu76/) first. It walks through the basics and uses the same sample project we’ll be referencing here.


In the [Elevation Advisor Sample Design](https://elevation-knowledgebase.s3.us-east-1.amazonaws.com/Proposals/Sections/sample_design.pdf), plants are being added to the bark mulch beds in the garden area. This section walks you through how to add plants to your proposal quickly and accurately, while keeping your workflow flexible and organized.


### Adding the Plants Section

If you haven’t already added a **Plants** section to your proposal:

* Click **Edit** in the top right corner

* Select **Plants** from the template library

* Click **Save** to add it to the bottom of your Included Sections


**Importing Measurements**




![Figure 1: Importing measurements from Beds.](https://elevation-knowledgebase.s3.us-east-1.amazonaws.com/Proposals/Sections/Images/Plants_1.png =400x126)


When you open the **Plants** section, you’ll see a button labeled **Import Measurements From…**. This allows you to pull in the square footage from another section, like **Beds**, so you don’t have to re-enter it manually.


Below the measurements grid, there’s a field to define **plant spacing**, the distance you want between each plant. This spacing value is used to calculate how many plants will fit within the measured area. Elevation Advisor segments the space into a grid of squares.




![Figure 2: Setting plant spacing.](https://elevation-knowledgebase.s3.us-east-1.amazonaws.com/Proposals/Sections/Images/Plants_2.png =400x368)


Based on the number of feet you specify, and places a plant at each corner of every square. For example, if you enter **3 feet**, the system will divide the area into 4’ x 4’ squares and position a plant at each corner, ensuring even distribution across the entire bed. This helps you quickly estimate quantities and maintain consistent spacing throughout your design.


### Adding Plants

Because plant selections vary widely from project to project, Elevation Advisor doesn’t include any preset materials in this section. Instead, you’ll build your list using your own catalog.


To begin:

* Expand the **Plants** section using the dropdown arrow

* Click **+ Add Materials**

* Most companies will select the **Nursery** category to view their plant list

* You can refine the list using **Subcategories** or **Groups** if you’ve set those up in your Materials Catalog

![Figure 3: Grouping plants in the proposal.](https://elevation-knowledgebase.s3.us-east-1.amazonaws.com/Proposals/Sections/Images/Plants_3.png =400x368)


As you add items, you’ll be prompted to enter a **quantity** and assign each plant to a group:

* Plants

* Specimen Trees/Plants

* Trees

* Hedge

* Misc


||| ⚠️ These groups are for internal organization only and are not visible to the client.


### Organizing and Editing Items

If you didn’t enter a quantity when adding a plant, click the **blue Edit button** next to the item to add one. You can also drag and drop items into the correct group if needed.




![Figure 4: Quickly edit quantities.](https://elevation-knowledgebase.s3.us-east-1.amazonaws.com/Proposals/Sections/Images/Plants_4.png =300x518)


* Click the **zero value** next to the first item

* Enter the quantity and press **Enter**

* The cursor will automatically move to the next item

* Repeat for the remaining plants


| ℹ️ This is especially helpful when working with large plant lists or complex installs.


Templates can also be a huge time-saver in this section. If you frequently install the same plant combinations, like a native pollinator mix or a formal hedge layout, you can save your setup as a **Custom Template** and reuse it in future proposals.


### Finalizing the Section

Once materials are in place, you can:

* Change Crew Size, Add labor, equipment, or subcontractors

* Enter a **Description of Services** to explain the scope of work

* Add **Crew Notes** for internal communication


If you need help with these steps, refer to the **Beds article**, which walks through the process in detail.